Call and
Signal
Menu

Operating Skills · Guide

What to Say During Your First Repeater Contact

Handheld radio resting on a work surface, with its antenna attached and side push-to-talk button visible.

When the repeater is available, a first call can be as simple as: “This is [your call sign] monitoring.” If someone answers, acknowledge them, offer a little information about yourself, and pass the turn back by name or call sign. You do not need a perfect speech; you need a clear opening and a way to listen and respond. This guide assumes you are a licensed U.S. amateur radio operator who has already configured and listened to a local repeater. It covers an ordinary first conversation, including what to do if the channel is busy, nobody replies, or you miss part of an answer. The call signs in every example below are placeholders; use the actual assigned call signs on the air.

Make Your First Call on an Available Repeater

First, make sure this is the right opening for the moment. Use a monitoring call when the repeater is available for a new conversation. If you hear an ongoing conversation, wait rather than speaking over it; the busy-channel choices are covered below. If you hear a net, follow its instructions instead of assuming an ordinary open conversation is underway.

For a quiet repeater, say:

> “This is K7ABC monitoring.”

Replace K7ABC with your assigned call sign. You can also think of the line as “This is [your call sign] monitoring” until you are ready to say your own sign aloud. It is a complete, short announcement: listeners know who is there and that you are available to talk. ARRL illustrates this kind of monitoring call and explains that it announces your availability to others on the repeater. It does not require anyone to answer.

After speaking, listen. Leave room for another operator to respond before deciding whether to do anything else. The opening is an invitation, not the beginning of a two-person exchange by itself. If someone does answer, listen for their call sign and what they say, then respond to that person rather than delivering a rehearsed paragraph.

ARRL advises against calling “CQ” as repeater etiquette. For this repeater opening, use the monitoring line instead. That advice is about wording on a repeater; it is not a claim that CQ is prohibited in every kind of amateur-radio contact. Nor is “monitoring” a legally prescribed phrase. It is a useful convention for letting other operators know you are ready for a conversation.

Before transmitting, it may help to have two pieces of information in mind: your call sign and a simple answer to “How are you doing?” or “Where are you located?” That is preparation for a natural reply, not a requirement to put everything into the opening call. One short line is enough to make yourself available.

Turn an Answer Into a Short Conversation

Suppose K7ABC is your placeholder call sign and N4XYZ belongs to the operator who answers. A short first exchange might sound like this:

> You: “This is K7ABC monitoring.”

> Other operator: “K7ABC, this is N4XYZ. Good afternoon. How are you doing?”

> You: “N4XYZ, this is K7ABC. Good afternoon. I’m doing well, thanks. My name is Sam, and I’m in Cedar Grove. How is your day going, N4XYZ?”

> Other operator: “It’s going well, Sam. I’m Pat, over in Milltown. Is this your first time on this repeater?”

> You: “Yes, it’s my first contact here. I’ve been listening and wanted to say hello. Thanks for answering, Pat. N4XYZ, back to you.”

The places, names, and call signs are examples, not details you must copy. In the first reply, the other operator calls you and identifies themselves. Your next turn acknowledges N4XYZ, answers the question they actually asked, supplies a little information, and gives the conversation back to them. In the second turn, you respond to their new question. That is the rhythm to learn: listen, answer, add a small opening for a reply, and hand off.

ARRL suggests ordinary starting topics such as a name, location, signal report, or brief station summary. These are possibilities, not a checklist to squeeze into one transmission. If the other operator asks how you are, answer that. If they ask where you are, give your location if you wish. If you can give a useful signal report, that can become a topic; if it is not relevant, you can simply continue the conversation.

A handoff also helps the other person know when you have finished your thought. “How is your day going, N4XYZ?” works because it asks a question and names the person who has the turn. “Pat, back to you” works even when you have no question. ARRL recommends passing off by name or call sign and keeping repeater transmissions short. Short turns leave space for the other operator to reply and for others who may need an opportunity to use the repeater.

You need not reproduce the exchange word for word. If Pat says, “What got you interested in radio?” a fitting response is a brief answer to that question, followed by a handoff: “I wanted to be able to talk with local operators, Pat. What got you started? N4XYZ, back to you.” If you do not have much to add, “Thanks for asking. I’m still getting used to making contacts. How long have you used this repeater, Pat?” keeps the exchange moving without pretending to know something you do not.

Likewise, you can slow down without apologizing for every pause. Listen until you understand the question, respond in a manageable turn, and leave a clear opening for the other person. The examples show conversational etiquette, not phrases the FCC requires you to say. A monitoring call may receive a friendly answer, but it may also receive none; you only have a QSO once another operator actually responds.

Choose the Right Words for a Known Station or a Busy Channel

Before speaking, decide what you are trying to do. Calling a particular station on an available repeater, joining an existing conversation, and briefly calling someone else while a conversation is underway are three different intentions. The words you use should make that intention clear.

If the repeater is available and you want a particular station, address that station rather than making an open monitoring announcement:

> “W2LMN, this is K7ABC.”

Here W2LMN is the placeholder call sign of the station you want, and K7ABC is yours. ARRL illustrates a targeted repeater call in that order: the wanted station’s call sign, then the caller’s. Listen afterward for a reply. This line seeks one person; “K7ABC monitoring” instead tells anyone listening that you are available. Neither line guarantees a response.

If an ordinary QSO is already in progress and you want to join that conversation, listen for a break between transmissions. During a gap, give your call sign:

> “K7ABC.”

Then listen for one of the operators to acknowledge you. If they do, make the request match your intention:

> “Thanks for acknowledging me. I’m K7ABC. May I join your conversation?”

If they welcome you, listen to the topic and contribute briefly before handing the turn back: “I’ve had a similar experience. What did you decide to try, Pat? N4XYZ, back to you.” If joining does not fit the moment, let the existing operators continue. Giving your call sign in a gap is the ARRL-described way to begin joining; the explicit invitation request above is an adaptable way to clarify what you want after acknowledgment.

If instead you need to make a brief call to a different station, do not call it “joining” the current QSO. Wait for a gap and give your call sign as above. Once an operator acknowledges you, ask for that separate use:

> “Thanks, this is K7ABC. May I make a quick call to W2LMN, then turn the repeater back to you?”

That request tells the current users what you intend. If they agree, make the brief call; when it is finished, yield the channel to them rather than treating your call as a new open-ended conversation. ARRL specifically advises asking politely for a quick call after acknowledgment. The wording here makes the intended station and the return to the existing users explicit.

For either busy-channel intention, do not routinely say “BREAK” to get in. ARRL cautions against using it to join a conversation. An active net may have its own instructions for when and how to call, so follow those instead of using these ordinary-QSO examples as a net procedure.

Handle Silence or a Call Sign You Did Not Catch

If no one answers your monitoring call, leave room for a response, then recognize what happened: you announced that you were available, but no conversation began. ARRL notes that a repeater can remain quiet after an operator says they are monitoring. Silence does not, by itself, tell you why nobody answered. In particular, it is not proof of a programming fault, and making another announcement does not promise a contact.

A modest practical choice is to keep listening, or stop and try another time. You do not need to fill the quiet with a pretend exchange or a stream of increasingly long calls. If you later hear activity, listen to what is happening before choosing a new opening; the channel may no longer be available. Those are operating choices for a quiet moment, not a technical diagnosis or an ARRL-prescribed repair.

A different problem arises when someone does reply but you miss their call sign or part of a sentence. Do not guess and build your answer around words you did not hear. You can ask plainly:

> “Station answering K7ABC, I missed your call sign. Could you repeat it, please? This is K7ABC.”

Or, if you caught the sign but missed the question:

> “N4XYZ, I heard your call sign, but missed the question. Could you say that again? K7ABC.”

ARRL recommends phonetics when a call sign is hard for the other station to hear. If your placeholder sign is K7ABC, you could repeat it as “K7ABC—Kilo Seven Alpha Bravo Charlie.” The phonetic words follow the sign’s actual order: K, 7, A, B, C. Phonetics can clarify the characters; they do not replace listening for the other operator’s reply.

Close the Contact and Identify Your Station

When it is time to leave, acknowledge the other operator and make the ending clear. With the same placeholder signs, a brief finish might sound like this:

> You: “Pat, thanks for the conversation. I’m going to head out now. N4XYZ, back to you.”

> Other operator: “Glad you called, Sam. Have a good afternoon. N4XYZ.”

> You: “Thanks, Pat. Have a good afternoon. K7ABC.”

The first line lets Pat know you intend to finish while still passing them a turn. The last line is your actual close: it is friendly and includes your assigned call sign. You can change the conversational wording to fit what was said. Saying someone’s name makes the exchange personable, but your name alone is not a substitute for station identification.

For a U.S. amateur station covered by the ordinary Part 97 identification rule, transmit your assigned call sign on the transmitting channel at the end of each communication and at least every 10 minutes during a longer communication. That timing comes from the FCC rule, not from ARRL’s suggestions about what makes a conversation flow well. If a contact continues long enough, do not wait until your final goodbye for your next required identification.

The named handoffs and brief turns earlier in this guide serve a different purpose: they help people follow the conversation and leave room for others. Your legal identification remains your responsibility even when the exchange is casual, and an example call sign never takes the place of your own assigned one.

For a first routine contact, keep the sequence simple. Open with your call sign when the repeater is available. If answered, listen, acknowledge, take short turns, and pass each turn clearly. If the channel is busy, distinguish joining the conversation from requesting a separate quick call. When you finish, say goodbye and identify your station with your assigned call sign.