Call and
Signal
Menu

Browse by topic

Choosing a Radio

Match a first radio and accessories to license privileges, operating goals, budget, and an achievable setup.

Nov 8, 20266 min read

PEP Power and Duty Cycle in Amateur Radio Explained

PEP describes the power at the crest of a signal's modulation envelope; duty cycle describes how much of a stated time interval is spent transmitting. They answer different questions. A station can produce 100 W PEP while averaging much less RF power over a conversation, yet a long digital transmission can impose a demanding heat load even when transmissions occur only occasionally.

→
Nov 2, 20266 min read

Wideband vs Narrowband in Ham Radio: What Changes?

In a typical handheld or mobile FM radio, choosing wide or narrow changes the intended transmit deviation and receive-channel bandwidth. Narrow FM uses a smaller frequency swing and a narrower receiver setting so nearby channels can be packed more closely. The important operating choice is to match the system you are using—not to assume that “wide” means more power or that “narrow” always receives farther.

→
Nov 1, 20267 min read

Decibels in Radio Explained: What dB Values Mean

A decibel, written dB, expresses a ratio. In radio power comparisons, about +3 dB means twice the power, −3 dB means half, and +10 dB means ten times as much. The reference matters: “3 dB more” describes a change, while “3 dBm” describes a power level relative to one milliwatt.

→